Location: >> Remote io server >> active ethernet io server

Active ethernet i/o server, 24vdc 12di,8do,modbus/tcp,snmp,active i/o messaging

Specifications:

Features and Benefits

* Instant event messaging by TCP/UDP/e-mail/SNMP trap
* DI counter saving when power off
* Easy-to-use Click&Go™ Logic for local output control
* 12-point 24 VDC digital input with counter
* 8-point 24 VDC digital output with pulse output
* PC-based configuration utility and web console
* I/O control over Modbus/TCP and SNMP protocol
* Windows/WinCE VB/VC and Linux C API
* Peer-to-Peer I/O without controller

Introduction

- Simple Applications without Programming

The ioLogik E2210 makes the trigger event result in digital alarm output directly. Using the ioAdmin UI to setup by “IF-THEN” logic rules, without the needs to write program of PC or Controllers to make it true.

- Software Event Counter Input and Pulse Output

Each digital input can be independently configured for DI or event counter mode, and the output can be independently configured for DO or pulse output mode.

• LAN:
Ethernet 10/100Mbps, RJ45
Protection 1.5KV magnetic isolation
Protocols Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP(MIB for I/O and Network), HTTP, SNTP

• Serial:
Interface RS-485-2w: Data+, Data-, GND
Serial Line Protection 15KV ESD for all signals

• Serial Communication Parameters:
Data Bits 8
Stop Bits 1
Parity None
Flow Control None
Protocols Modbus/RTU
Speed 1200 to 115200 bps

• Digital Input:
Channels 12, source type
I/O Mode DI or Event Counter (up to 900 Hz)
Dry Contact Logic 0: short to GND
Logic 1: open
Wet Contact Logic 0: 0 to 3 VDC,
Logic 1: 10 to 30 VDC (DI COM to DI)
Common Type 12 points per COM
Isolation 3K VDC or 2K Vrms

• Digital Output:
Channels 8, sink type, 45 VDC, 200 mA
I/O Mode DO or Pulse Output (up to 100 Hz)
On-State Voltage 24 VDC nominal
Output Current Rating Max. 200 mA per channel
Protection Over-temperature shutdown: min. 175°C
Over-current limit: typ. 400 mA/channel
Isolation 3K VDC per 2K Vrms

• Physical Characteristics:
Wiring I/O cable max. 14AWG

• Environmental Limits:
Operating Temperature -10 to 60°C (14 to 140°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)

• Power Requirements:
Power Input 24 VDC nominal, 12 to 48 VDC
DO Power 24 VDC nominal, up to 30 VDC

• Agency Approvals:
EMI FCC Part 15, CISPR (EN55022) class A
EMS IEC 61000-4, IEC 61000-6
Safety UL508
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6

• Warranty:
Warranty Period 2 years
Details See www.moxa.com/warranty