Specifications:
Features and Benefits
* Static routing, RIP V1/V2 to move data and information across networks
* Redundant Gigabit Ethernet ring and RSTP/STP (IEEE 802.1w/D)
* IGMP snooping and GMRP for filtering multicast traffic from industrial Ethernet protocols
* IEEE 802.1Q VLAN and GVRP protocol to ease network planning
* QoS-IEEE 802.1p/1Q and TOS/DiffServ to increase determinism
* Port Trunking for optimum bandwidth utilization
* IEEE 802.1X, HTTPS, and SSH to enhance network security
* SNMP V1/V2c/V3 for different levels of network management
* RMON for efficient network monitoring and proactive capability
* Bandwidth management prevents unpredictable network status
* Lock port function for blocking unauthorized access based on MAC address
* Port mirroring for online debugging
* Automatic warning by exception through email, relay output
* Digital inputs for integrating sensors and alarms with IP networks
* Redundant, dual DC power inputs
* Rugged, IP30-rated, high-strength housing
* DIN-Rail or panel mounting capability
Introduction
The EDS-828 is a high-performance Layer 3 switch designed for network routing, and the improved hardware technology built into the EDS-828 replaces the software logic used by traditional routers, offering better performance, and making the switch ideal for large-scale local area networks (LANs). In addition to Layer 3 features, the EDS-828 also supports Layer 2 management features, including QoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, RMON, IEEE 802.1X, HTTPS, and SSH. In order to meet the demands of any industrial application, the EDS-828 uses a modular design that allows users to install up to 4 Gigabit Ethernet ports and 24 fast Ethernet ports, providing a high degree of flexibility for network expansion.
• Technology:
Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100Base FX,
IEEE 802.3ab for 1000BaseT(X),
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX,
IEEE 802.3x for Flow Control,
IEEE 802.1D for Spanning Tree Protocol,
IEEE 802.1w for Rapid STP,
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1p for Class of Service,
IEEE 802.1X for Authentication,
IEEE 802.3ad for Port Trunk with LACP
Protocols IGMPv1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, RIP V1/V2, HTTP, HTTPS, Telnet, SSH, Syslog
MIB MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB,RMON MIB Group 1, 2, 3, 9
Flow Control IEEE 802.3x flow control, back pressure flow control
• Switch Properties:
Priority Queues 4
IGMP Groups 256
Max. Number of Available VLANs 64
VLAN ID Range VID 1 to 4094
• Interface:
Fast Ethernet 6 slots for any combination of 4-port Interface Module with 10/100BaseT(X) or 100BaseFX
Gigabit Ethernet 2 slots for any combination of 2-port Interface
Module with 10/100/1000BaseT(X), or 1000BaseSX/LX/LHX/ZX (SFP slot, LC connector)
Console RS-232 (RJ45)
Alarm Contact Two relay outputs with current carrying capacity of 1A@ 24 VDC
Digital Inputs Two inputs with the same ground, but electrically isolated from the electronics
• +13 to +30V for state “1”
• -30 to +3V for state “0”
• Max. input current: 8 mA
System LED Indicators STAT, PWR1, PWR2, FAULT, MASTER, COUPLER, T.RING
Module LED Indicators LNK/ACT, FDX/HDX, RING PORT, COUPLER PORT, SPEED
• Power Requirements:
Input Voltage 24 VDC (12 to 45 VDC), redundant dual inputs
Input Current 0.96A
Overload Current Protection Present
Connection Two removable 6-pin terminal blocks
Reverse Polarity Protection Present
• Physical Characteristics:
Housing IP30 protection
Weight 1950 g
Dimensions 362.4 x 142.47 x 128 mm (14.27 x 5.61 x 5.04 in.)
Installation DIN-Rail mounting, wall mounting (optional kit)
• Environmental Limits:
Operating Temperature 0 to 60°C (32 to 140°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
• Regulatory Approvals
Safety UL508 (Pending), UL60950-1, CSA C22.2 No. 60950-1, EN60950-1(Pending)
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), level 3
EN61000-4-3 (RS), level 3
EN61000-4-4 (EFT), level 3
EN61000-4-5 (Surge), level 3
EN61000-4-6 (CS), level 3
EN61000-4-8
EN61000-4-11
EN61000-4-12
Hazardous Location UL/cUL Class I, Division 2, Groups A, B, C, and D(Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending)
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6
MTBF 160,000 hrs
Database: Telcordia (Bellcore), GB
Maritime DNV (Pending), GL (Pending)
• Warranty:
Warranty Period 5 years
Details See www.moxa.com/warranty
|
