Location: >> Media converters >> ethernet to fiber converters

10/100baset(x) to 100basefx, single mode sc, single-strand fiber converter, tx 1550 nm, rx 1310 nm

Specifications:

Introduction

Using the fiber optic medium for Ethernet applications has become more popular due to fiber optic's excellent physical features, especially for long distance networks. However, fiber optic cable is very expensive, so if we can apply a solution that uses only 1 cable instead of 2, the infrastructure cost can be cut in half. This is where Moxa comes in. The Moxa ME61 Series provides a solution that reduces your expense by 50%!

The Moxa ME61 Series of Single-Strand Fiber Converterssupports Wavelength Division Multiplexing (WDM) technologythat allows two independent data communication channelsto transmit and receive over one standard, single mode,fiber optic line. This not only doubles your existingbandwidth, but also effectively reduces the cost ofcreating a new fiber optic infrastructure.

50% Cost Saving for Fiber Optic Infrastructures
With a pair of ME61 series products (ME61Aand ME61B), you can double the utilization of your existing,costly fiber optic cable, and save 50% of the cost ofa newly installed fiber optic application.

Features

Supports Link Fault Pass-Through
Powered by an external power adapter or USB port on hosting device
Single-Strand Fiber Converters allow transmission and receiving over single strand fiber with WDM technology
Media Conversion between 10/100BaseT(X) and 100BaseFX
Fiberconnection's half/full duplex mode is DIP Switchselectable
TPport's connection speed and half/full mode are DIPSwitch selectable

Specifications

Technology

Standards - IEEE802.3,802.3u, 802.3x

Interface

RJ45 ports - 10/100BaseT(X)
Fiber ports - 100BaseFX (Only SC connectors available)
LED Indicators - Power,LNK/ACT, 100, FDX/COL
DIP Switch - FX: FDHDX, Link Fault Pass-Through, TP:FDX/HDX, 100/10M, AUTO/Force

Cable Limitations

FX por  - Single-mode fiber, 20 km for full duplex
TP port  - Cat. 5 for up to 100 m
Single-mode fiber - 8.3/125, 8.7/125, 9/125 µm (recommended) or 10/125 µm single-mode

Single-Mode

Wavelength - TX:1310, RX: 1550 nm for ME61A; TX: 1550,RX: 1310 nm for ME61B
Min. TX Output  -10 dBm
Max. TX Output -7 dBm
Sensitivity  -32 dBm

Power

Input Voltage - 5 VDC adapter or USB port
Input Current - ExtendedPower Adapter: 1A @ 5 VAC - USB Interface Power: 0.5A @ 5 VDC

Mechanical

Dimensions (D x W x H)  - 94 x 70.3 x 26.2 mm

Environmental

Operating Temperature:  0 to 50°C
Ambient Relative Humidity:  5 to 90% (non-condensing)
Regulatory Approvals CE, FCC